Keil Kraft

Keil Kraft Pirate 33 span Laser cut parts set for the Keil Kraft Pirate, conating all the awkward to cut balsa and plywood parts such as ribs, formers, bulkheads curved trailing edge, fin, nose ring, wing and stabiliser tip shapes with rib slots cut, sub-fins, dihedral braces and dozends of other smaller...

Parts Set for the attractive Keil Kraft Scorpion. Includes all the shaped balsa and plywood parts required to build the basic airframe, including bulkheads, formers, wing ribs, shaped trailing edge for wings and tail. Shaped outlines for fin and rudder, sub fin, cowl cheek sides, dihedral braces, gussets,...

This Southerner Parts Set has been produced to the original Keil Kraft plans and includes all the shaped balsa and plywood parts required to build the basic airframe, such as formers, keel parts, bulkheads, wing ribs, tail ribs, wing/fin and tail outlines, dihedral braces, sub-fins, plus many smaller...

Kloud King RC Assist Vintage model, for .40 power or 600 watt electric. The original Mickey DeAngelis Kloud King appeared in 1938, this here is a later version for RC. The Belair parts set includes full size plans, laser cut parts in balsa and plywood, such as formers, bulkhead, internal fuselage sides,...

The KK Ladybird Parts Set includes all the shaped balsa and plywood parts required to build the basic airframe, so no cutting or tedious preparation. includes plans, builder to supply the strip and start building.

Parts Set for the Mercury Toreador model. Suitable for Stunt or Combat. Laser cut parts will save you hours of tedious cutting and include fuselage sides, fuselage top & bottom in one piece 1/2 balsa, bulkheads, formers, fin/rudder, wing tip shapes, wing ribs with additional tab to allow the symetrical...

A 48 wingspan miniature of the famous Keil Kraft Super Sixty for free flight or 3-function R/C, using 1.3-2.5cc (.08-.15 cu.in.) i/c or electric motors. Parts Set includes fuselage parts, formers, bulkhead, cowl cheeks, window outlunes, wing ribs, dihedral braces, wing tips, tailplane tips and elevator,...

Parts set for the original Tricycle geared Mini Super by Keil Kraft. Includes shaped balsa and plywood parts such as wing ribs, formers, bulkheads, wing tip outlines, braces, tail outlines and elevator, fin and rudder shapes, just add your own stripwood and covering. Full size plan included. 48 span...

Parts Set for the original Keil Kraft SkyStreak 40 stunter. Includes fuselage parts, formers, bulkhedas, wing ribs with additional tabs to allow the wing to be built flat on board - without packing, tail and fin parts, tip shapes, spinner ring, bellcrank mount, plus smaller parts. Builder to supply stripwood...

Now available as a parts set, the Keil Kraft Slicker is an outstanding design, with lots of graceful curves and superb performance. The Belair Parts set includes wing ribs with accurately cut spar slots, formers, bulkheads, pylon parts, curved trailing edges and tip shapes for wings, tail and fin, sub-fins,...

A parts set for the Keil Kraft Super 60. includes all shaped balsa and plywood parts, such as wing ribs, fuselage sides, bulkheads, formers, tip shapes for wing, fin and tail, tail & fin parts, dihedral braces, plus many smaller items. The parts set will allow you to start building without the tedium...

Parts Set for the attractive Keil Kraft derived Super Scorpion. Includes all the shaped balsa and plywood parts required to build the basic airframe, including bulkheads, formers, wing ribs, shaped trailing edge for wings and tail. Shaped outlines for fin and rudder, sub fin, cowl cheek sides, dihedral...