Keil Kraft

Junior 60 by Keil Kraft All the shaped balsa and plywood parts, such as formers, wing ribs, tip shapes for wing, tail and fin parts, dihedral braces, bulkhead, cowl cheeks, etc, just add strip and covering to complete basic airframe. Plan included showing radio modifications. Specifications Junior 60...

Parts Set for the easy to build Keil Kraft Ace. Includes all the laser cut parts to build the basic airframe including wing ribs, tip shapes for wing, tail and fin, formers, fuselage nose sheet, motor peg, nose block former, plus facsimile of original plan. Just add strip wood and covering to complete...

Parts Set for the easy to build Keil Kraft Ajax. Includes all the laser cut parts to build the basic airframe including wing ribs, tip shapes for wing, tail and fin, sub fin, formers, fuselage nose sheet, motor peg, nose block former. Just add strip wood and covering to complete airframe. Includes full...

Intricate parts sets for the Keil Kraft Chief A2 glider, containing all the laser cut balsa and plywood parts required to build the airframe, such as formers, tip shapes for wings, fin, rudder and tail, dihedral braces, wing boxes and wing tongues, wing ribs, gussets plus many smaller items. Save hours...

The KK Contestor Parts Set includes all the shaped parts for this fine performing, including fuselage outlines, formers, wing ribs, tip outlines, stab ribs, fin parts, etc - just add strip and sheet. Parts cut for the original Keil Kraft plan which is included. Specs Contestor designed by Bill Dean...

Parts Set for the curvy Keil Kraft Pacer Team Racer suitable for 2.5cc engines. Parts Set includes all the laser cut parts required to build the basic airframe including fuselages, sides, formers, bulkheads, tip shapes, curved trailing edge, fin/rudder, tailplane plus many smaller items. Saving you hours...

Parts Set for the pretty Keil Kraft Ranger Mk1 Team Racer suitable for 1.5cc engines. Parts Set includes all the laser cut parts required to build the basic airframe including fuselages, sides, formers, bulkheads, tip shapes, curved trailing edge, fin/rudder, tailplane plus many smaller items. Saving...

Parts set and plan for the 1947 Keil Kraft Rover cabin design. Designed for Mills 1.3cc motors. Attractive cowled engine and polyhedral wing. Parts set includes fuselage formers, bulkheads, wing ribs, tip shapes for wing fin, rudder and tail plan, including elevator, dihedral brace, sub fin, plus many...

The Senator is a popular rubber model and is very competitive in mini-vintage. Keil Kraft Senator - Parts Set includes wing ribs, stabiliser ribs, all tip outlines, motor mount, fuselage sheet, stab mount, sub fins, wheel, gussets. Prop must be supplied by the builder. Includes facsimile of original...

Parts set and plan for the classic Keil Kraft designed Slicker Mite pylon model designed by Bill Dean. Includes all the laser cut parts for the basic airframe, formers, pylon mount, bulkhead, crutch parts, wing ribs, tip shapes for wing, tail and fin, dihedral braces, tail ribs, sub fins, tail fin plus...

Parts Set for the Keil Kraft Spectre. Includes laser cut parts for fuselage sides, formers, bulkhead, wing ribs, tailplane. fin and rudder, tip shapes for wing, flaps, bellcrank mount, saving you hours of tedious hand cutting. Includes full size plan. Although strip wood/sheet is not included in our...

Intricate parts set for the 40 wingspan Keil Kraft Luscombe Silvaire. Includes 5 sheets of laser cut, graded balsa filled with all the parts required to build the basic airframe. Plan shown for reference only and to illustrate the contents - not included, supplied by Colin Smith. Save hours of tedious...

Parts Set for the Keil Kraft Bantam 39 shoulder wing power model. Bantam designed by Albert E Hatfull from Keil Kraft Parts Set includes all the shaped balsa parts to build the basic airframe, such as formers, bulkhead, wing ribs, tip shapes for wing, sub-fin, wing mount, keel parts, dihedral guide plus...

Part set for the magnificent 96 Keil Kraft Falcon. Includes all the shaped balsa and plywood parts required to build the basic airframe, such as formers, bulkheads, wing ribs, tail & fin components, wing tip shapes, plus many smaller parts that will save days of tedious cutting. Builder to add stripwood/sheet/covering...

All the tedium is taken out of building the Gypsy with this Parts Kit. Ribs, formers with stringers notches, tip shapes, sub fins, nose former, wing ribs, stab ribs, even gussets are in the box, all etched with their plan number. Just add strip and sheet to complete the basic airframe. These parts are...

1948 Phantom Mite - tiny CL gas model from KK. ED Bee power. KK Phantom Mite 16 CL. Parts set includes all shaped balsa and plywood parts to build the basic airframe, just add strip and plan.