Vic Smeed

Ballerina 38 inch Cabin Model designed by Vic Smeed for 0.5-0.75cc engines. Traditional all wood construction. Plan included Parts set includes all shaped balsa and plywood parts to build the basic airframe, including formers, laser cut window cut-outs, wing ribs, fin outlines sub-fin, tail mount, tail...

Quirky looking Vic Smeed designed Chatterbox. At 30 inch span it suits small .5cc i/c or electric RC conversion. Parts Set will save hours of tiring cutting as it includes fuselage sides with lightening hole and window apertures cut out, formers, bulkheads, tail parts, stabiliser, wing ribs, dihedral...

Coquette designed by by Vic Smeed. Originally published in A eromodeller 1950 30in span cabin model for .5cc engines or small electric. Our parts set suits the original Aeromodeller plan as published by My Hobby Store or use your original. Parts set includes all shaped balsa and plywood parts to build...

Courtesan 36 Sports cabin model - Until end of March 2020, now includes plan. Sport free-flight or two-function R/C- this pretty cabin power model from the early 1950s is happy in either mode. Traditional construction makes for rapid assembly and trimming is vice-free on motors up to 1cc power. Ideal...

Parts set for the pretty Vic Smeed designed Debutante cabin design. The parts set includes all the shaped balsa and plwyood parts required to build the airframe, so no tedious cutting. Plans included. Builder to supply their own strip/sheet and accessories to complete. Specification Debutante designed...

Vic Smeed 48in span power FF model. Powered by an Ohlsson 23, with average rate of climb 1,700 ft per minute. 1948 design. Parts Set includes all shaped balsa and plywood parts, such as formers, wing ribs, bulkheads, tip shapes for wing, fin and tail, cowl front, fuselage sheet sides, dihedral braces,...

The Lofty Lady is a 52 span cabin model, originally designed as the smaller Loftie Lassie by Vic Smeed. The design has been redrawn by Andy Brough and is presented as a Parts Set containing all the shaped balsa and plywood parts, such as fuselage sides, wing ribs, tip shapes, bulkheads, formers, dihedral...

Madcap was designed by Vic Smeed and published in Aeromodeller in April 1952 46in span Cabin design. Our parts set suits the original Aeromodeller plan, which is included and requires modification if the builder wishes to fly their Madcap RC. Parts set includes all shaped balsa and plywood parts to...

Majorette cabin model Our parts set suits the original Aeromodeller plan from myhobbystore or use your original. Parts set includes all shaped balsa and plywood parts to build the basic, including formers, fuselage side sheeting including laser cut window cut-outs, wing ribs, fin outlines sub-fin, tail...

The famous Mamselle by Vic Smeed cabin model available as a laser cut parts set that will save you hours of tedious hand cutting of parts. Add your selected stripwood to start building straightaway. Wing ribs, formers, bulkheads, dihedral brace, wing, tail and fin outlines, tailplane ribs, cowl front...

Parts Set for the Vic Smeed designed Thorneycroft (MTB MM337) Includes all bulkheads, keel, most of the superstructure detail (some cabin parts are not shown on plan and the builder will need to develop these details as they build), Birch plywood decking, plus many smaller hatch formers, etc. Quality...

Parts Set for the diminutive Poppet. Includes laser cut fuselages sides, formers, bulkhead, wing ribs, tip shapes, fin/rudder parts, tailplane ribs and tip shapes, cowl parts, plus smaller items. Full size plan included, builder to supply stripwood and covering. Specification Poppetby Vic Smeed from...

Now building the beautiful Popsie is easier than ever with a Parts set containing all the shaped wood parts, such as bulkhead, formers, wing ribs, tip shapes for wing, fin and tail, plus dihedral braces and smaller parts. Parts only suit the original Aeromodeller X-list plan. The photo of the Popsie...

Pretty by name, pretty by nature, this Vic Smeed design is an all wood traditional build, made simpler by the laser cut parts set. Featuring bulkheads, formers, wing ribs, dihedral brace, tailplane ribs, wing tip outlines for wing, tail and fin, plus sub fin and fuselage side sheeting with cut out window...

A Parts Set for the attractive Pushycat designed by Vic Smeed. Full size plan is included and shows RC assist conversion. Suits 400 electric or 0.75 i/c. Parts Set includes fuselage sides, formers, bulkhead, wing ribs, tip shapes, fin/rudder, u/c mount, tail ribs, fin parts, just add strip and sheet...

Parts Set for the Vic Smeed designed Range Safety Launch. Includes laser cut parts for frames, keel, superstructure, bulkheads in Birch plywood. Photo shows some of the parts. Includes 1/16 plywood decking with laser etched planking and details. The parts set will save hours of tedious hand cutting....