|
| Product List |
|
|
|
|
Hostetler Super Decathlon 30%- Partial Kit |
| 30% Super Decathlon
Span 115" Area: 2240 sq in Weight: 22-24 lbs. Length: 81.8" Power: 3-6 cu. in.
|
|
|
|
|
|
Hostetler Super Decathlon 33% - Partial Kit |
| 33% Super Decathlon
Span 126.72" Area: 2626 sq in Weight: 25-30 lbs. Length: 89.6" Power: 6-7 cu. in. |
|
|
|
|
|
Hostetler Tri-Pacer Nose Leg by Sierra |
| Designed to for the Hostetler Tri-Pacer, Sierra's Nose Legs are the best available. Made completely from alloy and using top quality rams. Suits the m... |
|
|
|
|
|
Howard DGA-15 Cowl |
| Genuine Don Smith accessory in epoxy/glass cloth. |
|
|
|
|
|
Howard DGA-15 Landing Gear |
| Save a lot of work with this custom alloy landing gear, designed just for you DGA |
|
|
|
|
|
Howard DGA-15 Plan |
| HOWARD DGA 15
Scale 1/4.8
Power 1.2 to 2.1
Wingspan 95 in. / Length 62.5 in.
Wing area 1304 sq. in.
Plan comprises 4 Sheets |
|
|
|
|
|
Howard DGA-15 Spinner |
| Custome made alloy spinner |
|
|
|
|
|
Howard DGA-15 Wheel Pants |
| Scale wheel pants for the Don Smith - Howard DGA-15 |
|
|
|
|
|
Howard Pete 30's racer Partial Kit |
| Designed on a shoestring by Benny Howard for the 1930 National Air Races, the dimunitive racer took third place. Described by a reporter 'as a balleri... |
|
|
|
|
|
Howard Pete 30's racer PLAN/CD |
| SPECS - 1/3 scale with 80.5 inch span, suiting 1.50 4 strokes. Weighs in at 17lbs ready to fly with a relatively low wing loading of 37oz/sq ft. The... |
|
|
|
|
|
HW4 Flamingo by C Williams |
| HW-4 Flamingo
A 5 meter model of this unusual Gull Wing glider from South America, using the well proven HQ 35 wing section. The Belair parts set i... |
|
|
|
|
|
HWB 100 Wakefield 44" by HW Bexley |
| Belair Parts Sets include all the laser cut parts required to build you next model. Typically formers, fuselage components, wing ribs, tail ribs, tip ... |
|
|
|
|
|
Icarus CL Stunter by Coasby - Parts Set |
| All the shaped parts required to complete the classic CL Stunter. Parts include fuselage components, formers, wing ribs, bellcrank mounts, tail and fi... |
|
|
|
|
|
Inchworm Glider Parts Set - Contest Kits |
| An accurate set of laser cut parts for the Contest Kits Inchworm A2 glider. Includes fuselage components, fin, rudder, all wing ribs and tail ribs, pl... |
|
|
|
|
|
Inlets and Engine Cap for Panther |
| Genuine Ziroli fiberglass accessory |
|
|
|
|
|
J-3 Cub PLAN by Hostetler |
| Multi sheet plan, clearly drawn with constructional detail. |
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
32 |
33 |
34 |
35 |
36 |
37 |
38 |
39 |
40 |
41 |
42 |
43 |
44 |
45 |
|
.jpg)
